DuraTech Class-A Chimney System 5" - 8" Diameter: chimney pipe

The first blue picture to the right is a typical 1 story through the roof installation. The blue picture on the far right is a typical 1 story through the wall installation.
USE THESE PICTURES TO SELECT THE PARTS YOU NEED. The red picture below shows the different lenghts of pipe. The number of stories of your house will determine how much length of pipe you will need.

TO ORDER PLEASE FOLLOW
CHECK OFF EACH BOX FOR THE PARTS YOU NEED AND CLICK THE BUY BUTTON AND THEY WILL APPEAR IN YOUR BASKET TO THE RIGHT
FOR PARTS THAT YOU NEED MORE THAN 1 OF GO BACK AND CHECK THE BOX OF THE PART AND CHANGE THE # NEXT TO THE BUY BUTTON FOR THE ADDITIONAL QUANTITY OF THE PART YOU NEED

DuraTech Class-A Chimney System - 8" Diameter

Pipe - 6" Length

Pipe - 12" Length

Pipe - 18" Length

Pipe - 24" Length

Pipe - 36" Length

Pipe - 48" Length

Adaptor (Connects Duratech to Double Wall Stovepipe - Lower left of picture)

Adaptor (Connects Duratech to Single Wall Stovepipe - Upper left of picture)

Adaptor Slip Connector Adjusts 4-14" (Duratech to Single Wall Stovepipe - Right side of above picture)

Attic Shield

Ceiling Support (inc. ceiling trim - 24" tall)

Ceiling Support (inc. ceiling trim - 11" tall)

Elbow 15 degree (Left of picture)

Elbow 30 degree (Right of above picture)

Elbow Strap (Bottom part in picture below)

Extended Roof Bracket - adjusts 67' - 114" (Top of three pictures to the right)

Firestop Shield (To be used if the square or round ceiling supports cannot be used)

Finishing Collar (This is used with the Wall Thimble)

Flashing 0/12-6/12 pitch, aluminum

Flashing 7/12-12/12 pitch, aluminum

Storm Collar ( On top of flahing)

Roof Support

Roof Support Trim 0/12-3/12 pitch (Black trim in middle of picture)

Roof Support Trim 3/12-6/12 pitch

Roof Support Trim 6/12-9/12 pitch

Roof Support Trim 9/12-12/12 pitch

Anchor Plate (Bottom of 3 parts in above picture)

Round Ceiling Support

Round Ceiling Support Trim Collar

Tee with Cover

Tee Support - The middle of the three parts above

Wall Strap - The bottom of the three parts above

Wall Thimble (This part holds a 6 or 12" pipe length through the wall)